AMI UCFL217 Flange Block Bearings

Mass:0.5 kg; Fatigue limit load, Cu:10.3 kN; Dynamic load, C:110 kN; Y2:3.68; d:40 mm; Brand:SNR; Characteristic outer ring frequency, BPF0:6.22 Hz; b:5.4 mm; Nref:8,300 rpm; Static load, C0:98 kN;

Seal:Silicone; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Basic Load Rating, Static Rating(N):11300; Unit Body Material:Cast Iron; Accessory:With steel plate cov; Surface Treatment:No; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; Grease Type:SH44M;

Da - Cup Frontface Backing Diameter:174.00 mm; d:120 mm; D:180 mm; r - Cup Backface To Clear Radius2:2.03 mm; db - Cone Backface Backing Diameter:134.11 mm; G1 - Heat Generation Factor (Roller-Raceway):255.1; C90 - Dynamic Radial Rating (90 million revolutions)4:89800 N; G2 - Heat Generation Factor

Number of Bearings:Double; Bearing Part Number:626; Days to Ship:7 Days; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Electroless Nickel P; Seals:VV (Non-Contact Rubb; Shape:Flange Type; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Shape:Flange Type;

A3:1.5 mm; T max.:100 °C; d:12 mm; Weight:0.51 kg; Recommended tightening torque for set screw:5.5 Nm; H:72 mm; Designation of bearing:UC201G2T04; T min.:-40 °C; A:20 mm; s1:15.5 mm;

Dz:80 mm; B:42.9 mm; L:163 mm; H:47.6 mm; N:14mm; Z:58.9 mm; Weight:1.5 kg; Designation of bearing:UC207-23G2L3; s1:21.45 mm; Designation of housing:PE207N-;

Designation of closed end cover:SCC206; Designation of housing:F206N-; A:31 mm; C:19.5 kN; A2:40.2 mm; s1:19.05 mm; Designation of bearing:UC206-20G2L3; Weight:1.15 kg; d:31.75 mm; C0:11.2 kN;

da min:45.5 mm; D6:51.8 mm; Radial rigidity:278 N/µm; Dynamic load, C:20.2 kN; Min operating temperature, Tmin:-30 °C; Characteristic cage frequency, FTF:0.43 Hz; Mass:0.18 kg; Brand:SNR; d1:49.2 mm; d:40 mm;

N2:85 mm; A5:50 mm; G:M10x1; L1:160 mm; S:32 mm; s1:41 mm; A1:26 mm; H2:132 mm; Designation of bearing:UC315-48G2T04; N1:36 mm;

Basic Dynamic Load Rating(N):28300; Outer Ring Shape:Flat; Retainer Type:Punching; Preload Mark:C3; Inner/Outer Ring Material:Steel; Types:16**/6*** series; Days to Ship:9 Days or more; Bearing Style:Rubber Sealed; Size Standards:Metric System; Number of Raceway Ring Rows:Single Row;

Cor - Static Load Rating:19643 lbf; Bearing Number:LSE115BR; Dimension H :2-3/4 in; Dimension J1 :8-1/4 in; Bolt Size:2 x 5/8; Support Type:Two-Bolt Plummer Blo; Series Type:Light Series; Dimension J2 :7-3/8 in; Cr - Dynamic Load Rating:18694 lbf; Housing Width:3.8 in;

Da - Outer Ring Backing Diameter:210.000 mm; Cg - Geometry Factor8:0.0856; Cage Material:Steel; Y0 - ISO Factor4:3.14; C1(2) - Dynamic Radial Rating (Two-Rows):621000 N; Reference Thermal Speed Rating (Oil)7:2600; Y1 - ISO Factor5:4.68; Design Unit:METRIC; B - Outer Ring Width:56.000 mm; Bore Taper:

I.D.(φ):9; Material:1045 Carbon Steel; Days to Ship:22 Days or more; Surface Treatment:Black oxide finish; Outer Diameter D(φ):50; Thickness T(mm):5; RoHS:6;

Symbol of Bearing Ring ShapeNo symbol: Internal B55High-Speed SteelStandardHolder SymbolG1 (high tensile braInner/Outer Ring MaterialSteelRaceway Ring ShapeCylindrical RollerInternal Clearance SymbolCMRolling Element MaterialSteelCylinder shape (suffix symbol: X)NoOuter ring oil holeM (with fitting

Flange Shape:Round Type; Bearing Part Number:6005; Number of Bearings:Double; Shape:Flange Type; Volume Discount:Available; Days to Ship:14 Days; Shape:Flange Type; Bearing Retained:Yes (with retaining; RoHS:6; Bearing Used:Deep Groove Ball Bea;